Licensed & Insured, in Reno and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Reno
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (775) 993-7431 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Reno and surrounding areas · On-site visits included · Free estimate within 24h
Reno Metal Roofing is a team of local certified professionals based in Reno. We respond quickly in Reno and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (775) 993-7431⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“Needed a metal roof on our grange hall out past the edge of the valley and these guys handled the whole thing. They used corrugated panels on a building that's been sitting exposed to mountain weather for decades, and the crew of four knocked it out in about three days. Straightforward, no drama, and the price matched the quote.”
Commercial Metal Roofing
“We had a bay window with a copper roof section that was looking rough, and Reno Metal Roofing reworked the flashing and the copper detailing around it. Honestly I was a little nervous spending that much, but the finished copper looks fantastic and the crew cleaned up every scrap. Four stars only because scheduling took a bit longer than they first told us.”
Copper & Specialty Metal Roofing
“They put a new ribbed metal roof on our hay barn out in the rural part of the county and it came out way better than I expected. Big span, and they had it dried in before the next storm rolled through. The snow guards they added were a nice touch I hadn't even thought to ask about.”
Commercial & Agricultural Metal Roofing
“Went with standing seam for our house and I'm so glad we did. The crew was on time every morning, kept the yard clean, and the seams are dead straight across the whole roof. It's been through a couple of windy storms already and not a single rattle.”
Standing Seam Metal Roofing
“Had a leak where the metal roof meets our chimney and these folks tracked it down fast. They reflashed the whole area around the pipe and sealed it up properly instead of just slapping caulk on it like the last guy. Two good rainstorms since and bone dry.”
Chimney & Skylight Repair
“Replaced the old metal roof on our place out in the dry hills and the difference is night and day. The crew of five stripped and reinstalled the whole thing in under a week, and they hauled off every bit of the old material. House stays noticeably cooler now too.”
Metal Roof Replacement
“We did the retrofit over our existing shingles and it was the right call. They laid the new metal panels right over the top, saved us a ton on tear-off, and the flashing around the vents was done clean. Only knock is they left a few screws in the driveway I found later, but the roof itself is solid.”
Metal Roof Over Shingles (Retrofit)
“Called them out for a repair after some wind damage loosened a bunch of fasteners and lifted a panel. They replaced the screws, re-fastened the loose section, and did a full inspection while they were up there. Fair price and they actually showed me photos of what they fixed.”
Metal Roof RepairReal photos of our work in Reno · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes tear-off of one layer, synthetic underlayment and standard flashings; simple roof shape lowers the rate |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed clips and seamed panels; pitch, panel width and roof complexity move the price |
| Metal shingle or stone-coated steel installation | Starting at $11/sq ft | Includes panel layout for HOA or historic profile approval; cut-up roofs with valleys add labor |
| Deck repair and flashing rebuild | On estimate | Soft decking, rotted fascia and rebuilt chimney or skylight flashing need an on-site look first |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Concealed fastener panels, standard trim, and underlayment included; simpler roof shapes keep it near this rate |
| Mechanically seamed 24-gauge | Starting at $13/sq ft | Powered seamer, heavier gauge, and full ice and water shield included; steep pitches and cut-up roofs push it up |
| Standing seam with snow guards | Starting at $15/sq ft | Panels plus snow retention above entries and walkways; snow load requirements and guard count move the number |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, chimney chases, or crane staging need an on-site measurement before we quote |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, exposed-fastener panels | Starting at $9/sq ft | Includes tear-off, new underlayment, panels, and disposal; pitch and decking condition move the price. |
| Full tear-off and replacement, standing seam | Starting at $14/sq ft | Includes concealed-fastener panels and full flashing; roof complexity and panel width are the main factors. |
| Metal shingle or stone-coated steel replacement | Starting at $13/sq ft | Includes Class A assembly and HOA-friendly profiles; steep pitches and dormers add labor. |
| Copper and specialty metal replacement | On estimate | Soldered details and hand-formed flashing require an on-site look before we quote a number. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, single-story ranch | Starting at $7/sq ft | Covers inspection, slip sheet, and exposed-fastener panels on a simple low-pitch roof. |
| Retrofit with metal shingle or stone-coated steel | Starting at $9/sq ft | Adds textured panel material and more layout time on cut-up roofs. |
| Steep or complex roof with snow guards | On estimate | Pitch, valleys, and snow-shedding protection need an on-site measure before quoting. |
| Deck repair found during inspection | Quoted as line item | Rotted sheathing or rafters are priced separately after photos are shared with you. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, fasteners, small patch) | Starting at $450 | Covers service call, leak diagnosis, and basic reseal or fastener replacement; price rises with panel count and access difficulty. |
| Panel replacement (1 to 5 panels) | Starting at $850 | Includes removal, matching panel install, and resealing; cost moves with panel profile, color match, and roof pitch. |
| Flashing and penetration repair | Starting at $650 | Rebuilds chimney, skylight, or wall flashing; price depends on detail complexity and whether the deck needs repair. |
| Storm or wind damage repair | On estimate | Needs an on-site look because damage extent, insurance documentation, and panel availability vary widely. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic visit and minor leak repair | Starting at $450 | Includes inspection, water test, and a straightforward fix like fasteners or a short flashing re-seal. |
| Fastener replacement and re-fastening | Starting at $650 | Covers pulling failed screws and installing new washers; price rises with roof size and access difficulty. |
| Flashing or pipe boot rebuild | Starting at $750 | Includes removing failed caulk and rebuilding the flashing; steeper roofs and second stories move the price up. |
| Panel section replacement | On estimate | Needs an on-site look because panel profile, color match, and tie-in complexity vary by roof. |
| Emergency tarping after storm | Starting at $350 | Priority response to stop active water intrusion; credited toward the permanent repair if booked together. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (single slope) | Starting at $750 | Covers failed screw replacement and water test on one accessible slope, up to 2 stories. |
| Full slope re-fastening | Starting at $1,450 | Replaces every fastener on one slope with new oversized screws and fresh EPDM washers. |
| Full roof audit and re-fastening | On estimate | Every fastener, flashing, and penetration inspected and re-sealed; scope depends on roof size and pitch. |
| Steep or high-access roof (Incline Village, Mount Rose) | On estimate | Steep snow-shedding roofs and tall mountain homes need staging and fall protection priced in. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof | Starting at $5.50/sq ft | Includes standard corrugated panels, basic trim, and closures; gauge and color move the price. |
| R-panel (ribbed) roof | Starting at $6.00/sq ft | Includes trapezoidal rib panels and trim; roof pitch and span length affect the final rate. |
| 5V crimp panel roof | Starting at $6.50/sq ft | Includes narrow-rib panels with trim; visible facades and complex flashings raise the cost. |
| Re-fastening and screw replacement | On estimate | Needs an on-site look to count backed-out screws, rusted washers, and closure condition. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation | Starting at $9/sq ft | Includes panels, underlayment and standard flashing; pitch and roof complexity move the price up. |
| Metal shingle roof replacement (tear-off) | Starting at $11/sq ft | Includes removal and disposal of existing layers; number of layers and access affect the total. |
| Retrofit over existing shingles | Starting at $10/sq ft | Includes prep and new panels where code allows; existing layer count and deck condition decide feasibility. |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, skylights or steep pitches need an on-site look before we quote. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, simple ranch roof | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels, and standard flashing on a walkable pitch. |
| Shake or tile profile, two-story home | Starting at $12/sq ft | Includes steeper access, more flashing at dormers and valleys, and ridge cap installation. |
| Mountain home with snow guards | Starting at $15/sq ft | Includes heavy snow load detailing and snow guard layout for steep roofs along the Mount Rose Highway. |
| Retrofit over existing shingles | On estimate | Requires an on-site look to confirm layer count and code limits before we quote a number. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper bay window or porch cap | Starting at $20/sq ft | Includes custom forming and soldered corners; size and access move the price. |
| Zinc dormer or accent roof | Starting at $24/sq ft | Pre-weathered zinc panels and flashing; pitch and roof height affect labor. |
| Full copper architectural roof | On estimate | Needs an on-site look at deck condition, flashing scope and snow guard layout. |
| Custom flashing and chimney caps | On estimate | Priced by the number of penetrations and how the metal ties into the wall. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, sound roof | Starting at $2.50/sq ft | Includes wash, spot prime, and one reflective topcoat on accessible panels. |
| Full prep with rust treatment | Starting at $3.50/sq ft | Adds rust conversion, primer, and fastener check on oxidized panels. |
| Steep or multi-level roof | On estimate | Pitch and staging needs a site visit before we quote a firm number. |
| Commercial or agricultural building | On estimate | Large square footage and access determine the rate per square foot. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney or skylight flashing repair | Starting at $600 | Covers removal and rebuild of one penetration with standard access and sound sheathing. |
| Valley or wall transition flashing | Starting at $750 | Includes new valley metal or step flashing where debris and snow creep opened the seams. |
| Skylight curb rebuild on steep roof | Starting at $1,200 | Higher price reflects roof pitch, snow-country access, and taller custom back pan. |
| Copper or specialty metal flashing | On estimate | Material cost and custom bending drive the number, so we quote after measuring. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single slide zone protection | Starting at $1,200 | Covers layout, seam-clamp or pad hardware, and install on one eave or entry zone. |
| Bar and rail system | Starting at $2,400 | Continuous rail run above the eave for steep roofs with heavy snow loads. |
| Multi-zone or steep-pitch job | On estimate | Roof size, pitch, eave height, and number of entries decide the final number. |
| Travel | Included | in Reno and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, fastener, and gutter inspection with photo documentation and a written condition summary |
| Minor wind repair (screws, flashing, ridge cap) | Starting at $350 | Covers reseating flashing and replacing backed-out screws; steep pitch or two-story access moves the number up |
| Panel replacement (one slope or section) | Starting at $1,200 | Includes matching panel, gasketed fasteners, and seam or lap sealing; panel profile and pitch affect the total |
| Emergency stabilization and tarping | Starting at $450 | Same-week tarping and bracing of open sections; roof height and active leak severity drive the price |
| Full storm-damaged replacement | On estimate | Needs an on-site look at decking, fastener schedule, and snow and wind load before a number is given |
| Estimate and insurance documentation | Free | Written scope with photos for your insurer; response within 24 hours at (775) 993-7431, no obligation |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic walk-over inspection | Free estimate | Visual check of panels, fasteners, seams, and flashing with a verbal summary of condition. |
| Full condition assessment | Starting at $350 | Photo-documented report covering coating wear, fastener condition, attic, and ember details. |
| Pre-purchase inspection | Starting at $450 | Independent written report on remaining service life, sized by roof area and access. |
| Leak investigation | On estimate | Targeted tracing of an active leak, priced after we see the roof and attic. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, standard run | Starting at $9/linear ft | Includes formed gutter, hangers, and basic downspouts; steep pitch or long runs raise the rate. |
| Gutter with ember-resistant guards | Starting at $14/linear ft | Adds metal mesh guards sized for pine needles and ember defense on foothill homes. |
| Gutter with snow guards above the line | On estimate | Snow retention layout depends on panel type, pitch, and load, so we price it after a site look. |
| Fascia repair or replacement | On estimate | Rotted or torn fascia must be fixed before hangers go on, and scope varies by damage. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (775) 993-7431, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Covers screw and washer replacement, closure strips and leak tracing on existing panels. |
| Exposed-fastener ribbed panel roof | Starting at $4.50 per sq ft | Includes panels, underlayment and fasteners; pitch and tear-off volume move the price. |
| Standing seam commercial roof | Starting at $9.00 per sq ft | Concealed fasteners and raised seams; building height and access drive the final number. |
| Insulated panel system | On estimate | Needs an on-site look at purlin spacing, ventilation and the building's moisture load. |
| Travel | Included | In Reno and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (775) 993-7431, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Reno need a crew that understands what roofs here actually face: steep mountain pitches, heavy tree cover, high-elevation sun and snow, and a large stock of aging screw-down roofs whose fasteners are reaching the end of their service life. Reno Metal Roofing is the local answer for metal roof installation, replacement, re-roof, and repair on homes from the Truckee Meadows to the foothills and up toward Mount Rose.
We serve Reno, Sparks, Spanish Springs, Sun Valley, Verdi, and the surrounding communities, working through a network of licensed, insured local contractors who know Washoe County housing stock firsthand. Whether you need a full Metal Roof Installation or a targeted repair on a mountain home, we give straight guidance on what your roof actually needs.
Most metal roof leaks in Reno trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Seams can separate as panels expand and contract through freeze-thaw nights and hot high-desert days. Pipe boots, chimney and skylight flashing, and valley details fail as sealant ages. The Washoe Zephyr can lift and peel panels at edges and ridges, and fallen limbs from Jeffrey pines and cottonwoods puncture panels outright.
Ignoring these problems makes them worse fast. Water often tracks along purlins and decking far from the entry point before it shows up inside, so a small leak can rot sheathing and saturate insulation well away from the stain on your ceiling. That is why we open things up and find the source rather than sealing over symptoms. Our Metal Roof Leak Repair starts with tracing the actual path of water.
The honest call between repair and replacement is not always replacement. A full screw replacement and re-fastening with new sealing washers often restores a watertight roof for a fraction of the cost of a new one, and we will tell you plainly when that is the right move. When panels, seams, or decking are too far gone, we say so. Call (775) 993-7431 or request a free estimate and we will diagnose the failure before recommending anything.
We install the full range of metal systems and match them to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for a clean look and low maintenance. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Both are legitimate choices depending on budget and building. Metal Roof Over Shingles (Retrofit) is a real option when the deck is sound, and tear-off is the right call when it is not.
Metal roof projects in Reno are typically quoted per square foot for installations, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges only, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof rather than a ballpark.
On storm damage and insurance, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, the process is informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices.
Requirements vary, so always verify with the Reno building or planning department before starting your project. For documentation or to schedule an inspection, contact us.
Ready to get started? Reno Metal Roofing serves in Reno and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431
Your Free Quote Request