Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Sparks, NV (89431) · Local Professionals

Reno Metal Roofing · Fast response in Sparks and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sparks is a city of practical roofs. From the older ranch homes off Prater Way and the tidy streets near Victorian Square to the big industrial buildings along the I-80 corridor, most of the housing stock here was built for function, not fuss. That means low-slope and moderate-pitch roofs, lots of asphalt shingles, and a growing number of property owners who are done replacing them every 15 years.

We are Reno Metal Roofing, and Sparks is a big part of our service area. Since 2009 we have installed, repaired, and replaced metal roofs on everything from 1950s ranch houses in the 89431 ZIP code to commercial shops near the Sparks Marina. If you are tired of wind-lifted shingles after a Washoe Zephyr gust or you are planning a reroof before the next snow season, we can help.

Metal Roofing in Sparks (89431)

Sparks sits at about 4,500 feet in the Truckee Meadows, and the conditions here are hard on roofs. The high-desert sun bakes shingles year-round, afternoon winds funnel through the valley and peel back anything that is not fastened down properly, and winter brings real snow and freeze-thaw cycles. In the older parts of Sparks, especially the ranch homes built between the 1950s and 1970s, we often find original roof decks that need a careful once-over before we can install metal. Out toward the industrial and agricultural properties on the east side, we deal with larger roofs, tighter lot access for equipment, and the need to keep businesses open while we work. Our crews are fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance member. We have been serving Sparks and the surrounding Reno area since 2009, and we know what holds up here.

Our services in Sparks

How a Job Works in Sparks

Step 1: You call us at (775) 993-7431 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We look at the roof, the deck, the flashing, and the access, and we talk through your options: a full replacement, a retrofit over existing shingles if your roof qualifies, or a repair if that is all you need. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. In Sparks, that might mean coordinating with an HOA in a newer development or working around tight driveway access in an older neighborhood. We keep you posted on timing and protect your landscaping and siding during tear-off and installation.

Step 3: When the job is done, we clean up thoroughly, haul away all debris, and walk the roof with you. We do not leave until you have seen the finished work and understand the warranty and maintenance basics. Our team leaves your property clean.

Metal roofing in Sparks is priced by the square foot, and the final number depends on the size and pitch of your roof, the condition of the deck, access, and the material you choose. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8, standing seam starts at $10, and stone-coated steel or metal shingles start around $9. A retrofit over existing shingles can start at $7 per square foot if your roof qualifies. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. Snow guards and ice protection start at $1,200. For a free estimate on your Sparks property, call (775) 993-7431.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sparks and nearby areas.

My 1960s ranch home near Prater Way has two layers of shingles. Can you install metal over them?
Maybe. Code limits how many layers you can recover over, and two layers is often the maximum. We will inspect the deck and the existing layers during a free assessment. If a retrofit is not allowed or not wise, we will explain why and give you a clear price for a full tear-off and replacement.
A windstorm just lifted some panels on my shop near the Sparks industrial area. How fast can you get out?
We treat storm and wind damage as a priority. Call (775) 993-7431 and we will schedule a free inspection, usually within a day or two depending on the season. We can secure the roof temporarily if needed and give you a written repair estimate before any work begins.
What does a typical metal roof replacement cost for a 1,500 square foot house in Sparks?
For a house that size, most replacements fall somewhere between $12,000 and $20,000 depending on the material, roof pitch, deck condition, and whether we tear off the old roof or retrofit. Standing seam and specialty metals are at the higher end. We give you a firm written estimate after seeing the roof, not a guess over the phone.
Do I need a permit for a metal roof in Sparks, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and fees vary. We pull the permits for our jobs and coordinate the inspections. For specifics on your property, the City of Sparks website is the best place to start, and we are happy to walk you through what we handle.
My HOA requires a specific roof color. Can you work with that?
Yes. We regularly coordinate with HOAs in Sparks and Reno on panel profiles and colors. Send us your HOA guidelines or design review requirements, and we will match a product that meets them. If a neighbor's property line is close, we also follow setback and drainage rules so the installation does not create a problem.
Are you fully insured for work on my Sparks property?
Yes. We carry general liability and workers' compensation insurance, and we can provide proof of coverage before we start. Our crews are covered, and your property is protected while we are on site.
What maintenance does a metal roof need in Sparks to handle the snow and sun?
Metal roofs are low maintenance, but not zero maintenance. We recommend a yearly inspection in the fall to check fasteners, seals, and flashing before snow arrives, and to clear debris from valleys and gutters. If you have snow guards, check them after heavy snow. Catching a loose fastener early is far cheaper than repairing a leak later.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm