Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Fernley, NV (89408) · Local Professionals

Reno Metal Roofing · Fast response in Fernley and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Fernley is a high-desert town where the wind has a straight shot across the flats and the summer sun bakes every roof on the block. Most of the housing here went up in the 1990s and 2000s, with two-story stucco homes packed into subdivisions off Farm District Road and older ranch places scattered along Main Street and the Truckee Canal. Out past the last cul-de-sac, the sagebrush starts fast, and that open ground is exactly what sends dust and gusts against your shingles.

Homeowners in 89408 call Reno Metal Roofing because we have been working this corner of Lyon County since 2009, and we know what Fernley weather does to a roof. The same afternoon winds that kick up dust near the Fernley Swimming Pool are the ones that work at loose fasteners and lift panel edges all winter. We are fully insured, a Metal Roofing Alliance member, and we show up ready to talk straight about what your roof actually needs.

Metal Roofing in Fernley (89408)

Fernley sits on flat ground with a lot of newish subdivisions, and that changes the work. Lots are tight in places like the neighborhoods off Jennys Lane, so staging panels and getting a lift truck close takes planning. The soil is sandy and alkaline in spots, which matters for how water drains away from the foundation once it leaves the roof. And because so many homes here are two-story stucco with simple gable ends, wind gets underneath at the edges first. That is where we see lifted panels, missing screws, and flashing that has pulled away after a hard winter storm coming off the Sierra.

We have been serving Fernley and the surrounding Reno area since 2009. That means we have replaced plenty of original 20-year shingle roofs on these houses, and we have retrofitted metal over existing shingles where the code allowed it. We also handle the smaller stuff that keeps a metal roof tight: screw replacement, re-fastening, and coating for roofs that are still solid but faded from the sun.

Our services in Fernley

How a Job Works in Fernley

Step 1: you call (775) 993-7431 or send us a request, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at how water is leaving the house. You get a written estimate with the scope spelled out, no pressure and no surprises.

Step 2: once you approve, we pull the permit through the local building department and schedule the work. In Fernley that often means coordinating with an HOA on panel profile and color before anything gets ordered. On tight lots we plan panel delivery and staging so we are not blocking your neighbor's driveway. If we are doing a retrofit over shingles, we confirm the existing layers meet code before we start.

Step 3: we clean up every day and do a final walkthrough with you when the job is done. Magnets go over the yard for screws, gutters get checked, and we make sure you know what was done and what to watch for. We leave your property clean.

Pricing in Fernley depends on the size and pitch of your roof, how easy it is to access, and the condition of what is underneath. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and metal roof replacement around $9. A retrofit over existing shingles starts around $7 per square foot when the layer count allows it. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting is the budget-friendly option at about $2.50 per square foot for a roof that is still sound. Every roof is different, so call us at (775) 993-7431 for a free estimate and a real number for your house.

✅ Metal Roofing Alliance Member, licensed and insured for work in Fernley and nearby areas.

My house is in one of the newer subdivisions off Farm District Road, and the roof edges seem to take a beating. Why is that?
That is the wind pattern here. Fernley is flat and open, so gusts hit the edges and corners of a roof first, especially on two-story homes with simple gables. We see lifted panels, backed-out screws, and loose flashing on those edges more than anywhere else. A metal roof with the right fasteners and proper edge detailing handles it much better than aging shingles, and we can inspect yours for free to see what is going on.
A windstorm just peeled back part of my roof. How fast can you get out to Fernley?
Call (775) 993-7431 and tell us what happened. We treat active leaks and wind damage as priority calls and will get an inspection scheduled as quickly as we can. We can tarp or secure the area to stop further damage, document what we find for your insurance, and give you a repair estimate. We never promise coverage, but we do give you the paperwork you need to file a claim.
What does a metal roof cost for a typical Fernley house?
Most homes here fall in a range, not a single price. Corrugated panel starts around $5.50 per square foot, installation around $8, and standing seam around $10. A repair or leak call starts around $450. The big factors are roof size, pitch, how many layers are already on the roof, and access. We give free estimates at (775) 993-7431 so you get a number for your actual house.
Do I need a permit to replace my roof in Fernley?
In most cases yes, a full replacement or re-roof requires a permit, and the rules and inspection requirements can vary. We handle the permit process for you and confirm what applies to your property before work starts. You can also check with the City of Fernley website or Lyon County for local requirements. We always defer to the local building department on the final word.
My HOA has rules about roof color and panel style. Can you help with that?
Yes. We work with HOAs in Fernley regularly and can provide the product specs and color samples your architectural review committee needs. We confirm approval before ordering materials so there are no surprises. If there is a question about where your roof line meets a neighbor's property, we keep the work within your lot and flag anything that needs a survey.
Are you insured for work on my Fernley property?
We are fully insured, with general liability and workers' compensation coverage. That protects you and your home if anything goes wrong on the job. We are happy to provide proof of insurance before we start.
What should I do to get my metal roof ready for winter in Fernley?
Fall is the time to check fasteners, seams, and flashing before the winter storms come off the Sierra. Snow guards and ice protection are worth considering if you have a steep roof or walkways below. A coating can also extend the life of a roof that is faded but still solid. We offer free inspections and can tell you what actually needs attention versus what can wait.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm