Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Silver Springs, NV (89429) · Local Professionals

Reno Metal Roofing · Fast response in Silver Springs and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Silver Springs is a high-desert town where the lots are wide, the sun is relentless, and most homes sit on acreage or large parcels along US-95. The housing stock here runs from older ranch houses and manufactured homes to newer builds and ag shops, and many roofs are corrugated or ribbed panel metal that takes a beating from UV and wind.

Homeowners in 89429 call Reno Metal Roofing because we understand the specific wear we see out here: cracked washers, faded paint, and fasteners that work loose after a hard summer. We have been serving the Reno area since 2009 and we bring that same experience to Silver Springs, whether you are off the highway near the Silver Springs Airport or out on a rural road toward Lahontan Reservoir.

Metal Roofing in Silver Springs (89429)

Silver Springs is not a subdivision with tidy cul-de-sacs. Properties here are often on dirt or gravel drives, with wide lots, outbuildings, and a mix of residential and agricultural use. That means access can be tight for a full crew and delivery truck, and we plan for that. The ground is sandy and alkaline in places, so we pay attention to how water drains away from the roof and foundation. The intense high-desert sun is the main enemy: it bakes panel coatings, dries out washers, and causes screws to back out over time. We see a lot of corrugated and ribbed panel roofs that need re-fastening and screw replacement rather than a full tear-off. Wind is the other factor. Afternoon gusts and storm fronts can lift panels or peel back edges if the fastening pattern is not right. Our crews are fully insured, and we handle everything from standing seam installation to leak repair and snow guards for the few properties that need them. We have been serving Silver Springs and the surrounding Reno area since 2009, and we are a Metal Roofing Alliance member.

Our services in Silver Springs

How a Job Works in Silver Springs

Step 1: You call us at (775) 993-7431 or request a free estimate online. We schedule an on-site assessment at your property in Silver Springs. We look at the roof condition, the panel type, the fasteners, the flashing, and how the roof drains. We also check access for equipment and materials. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the local jurisdiction and schedule the work. In Silver Springs, that often means coordinating with Lyon County and planning around rural access. If your property has a long driveway or tight turnaround, we bring the right size truck and stage materials efficiently. For panel roofs, we often replace screws and washers and re-fasten panels rather than replace the whole roof, which saves you money and keeps the original panels in service.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for screws and metal scraps, haul away old materials, and walk the roof and gutters with you. We do not leave a mess behind, and we make sure you know what was done and what to watch for.

Pricing in Silver Springs depends on the size and pitch of your roof, the panel type, access, and condition. For a typical ranch home or shop, corrugated and ribbed panel roofing starts at $5.50 per square foot, and metal roof installation starts at $8 per square foot. Standing seam starts at $10 per square foot, and metal roof over shingles (retrofit) starts at $7 per square foot. If you just need repairs, metal roof repair and leak repair start at $450, and screw replacement and re-fastening starts at $750. Flashing and skylight repair starts at $600, and gutters for metal roofs start at $9 per linear foot. The biggest cost factors are roof size, how many penetrations and valleys there are, and whether we can access the roof easily with a truck and trailer. Call us at (775) 993-7431 for a free estimate and a straight answer on what your roof actually needs.

✅ Metal Roofing Alliance Member, licensed and insured for work in Silver Springs and nearby areas.

My metal roof in Silver Springs has screws backing out and washers cracking. Do I need a whole new roof?
Probably not. In Silver Springs, the intense sun dries out the neoprene washers and causes screws to loosen over time. We can replace the screws and washers and re-fasten the panels, which is far less expensive than a full replacement. We start with a free inspection to check the panel condition and the underlayment.
A windstorm just lifted some panels on my roof near Lahontan Reservoir. How fast can you respond?
We prioritize storm and wind damage calls in Silver Springs. Call us at (775) 993-7431 and we will schedule an inspection as soon as possible. We can secure loose panels and stop leaks quickly, then give you a full repair estimate. We document everything for your insurance claim if needed.
What does a typical metal roof repair cost in Silver Springs?
Most repairs start at $450 for leak repair or flashing issues. Screw replacement and re-fastening starts at $750. The final price depends on the size of the roof, how many fasteners need replacing, and whether there is damage to the panels or underlayment. We give you a written estimate before we start.
Do I need a permit for a metal roof replacement in Silver Springs?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We recommend checking with Lyon County before you start. You can find contact information on the City of Silver Springs official site at https://www.lyon-county.org. We handle the permit process for you as part of the job.
My neighbor says my new roof panels overhang the property line. What should I do?
Property line issues are common on larger lots in Silver Springs. Before installation, we review the site plan and setbacks with you. If there is a question about the property line, we recommend getting a survey. If you are in an HOA, we also help coordinate approval for panel profile and color.
Are you fully insured for work on my Silver Springs property?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide a certificate of insurance before we start work on your property.
How often should I have my metal roof inspected in Silver Springs?
Because of the intense sun and wind here, we recommend an inspection every two to three years, and after any major storm. We check fasteners, washers, flashing, and panel condition. Catching loose screws early prevents leaks and extends the life of your roof. We offer free estimates for inspections.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm