Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Lemmon Valley, NV (89506) · Local Professionals

Reno Metal Roofing · Fast response in Lemmon Valley and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Lemmon Valley is a high-desert community just north of Reno, where wide lots and older ranch homes sit against sagebrush foothills at roughly 4,500 feet. Most houses here were built between the 1970s and 1990s, and many still wear their original asphalt shingle roofs, now curling and shedding granules after decades of intense sun and hard freeze-thaw nights.

Homeowners in Lemmon Valley (89506) call Reno Metal Roofing because we understand the local failure modes: wind-lifted shingles after a Washoe Zephyr gust, ice damming at the eaves, and leaks that show up after a snowmelt. We have been installing and repairing metal roofs around Reno since 2009, and we know the streets off Lemmon Drive and the properties near the Stead corridor as well as anyone.

Metal Roofing in Lemmon Valley (89506)

Lemmon Valley properties tend to be larger lots with detached garages, shops, and outbuildings, and the ground here is a mix of sandy soil and caliche that can make anchoring and drainage tricky. The wind is the big one: afternoon gusts funnel through the valley and work on any loose fastener or lifted shingle edge. We see a lot of shingle roofs that have lost tabs along the ridges and gable ends, which is exactly where a metal roof with proper fastening shines. Snow loads are moderate compared to Tahoe, but freeze-thaw cycles still drive ice dams at the eaves, and the high-desert sun bakes south-facing slopes year-round. Access can be tight on some of the older parcels with long gravel driveways, so we plan staging and material delivery accordingly. Our team has been serving Lemmon Valley and the greater Reno area since 2009, and we are a Metal Roofing Alliance member.

Our services in Lemmon Valley

How a Job Works in Lemmon Valley

Step 1: You call us at (775) 993-7431 or request a free estimate online. We schedule an on-site assessment at your Lemmon Valley property, inspect the existing roof, check the decking and flashing, and talk through options like a retrofit over your current shingles or a full tear-off. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits through Washoe County (rules vary, so we verify with the local building department) and schedule the work. Our crew is fully insured and handles the details, from protecting your landscaping to coordinating with any HOA design review. On tighter lots off Lemmon Drive, we plan material drops and staging so we do not block your neighbors or your driveway.

Step 3: When the job is done, we clean the site thoroughly, haul away all debris, and walk the roof with you. We do not leave until you are satisfied and understand the maintenance basics for your new metal roof.

Pricing in Lemmon Valley depends on the size and pitch of your roof, the condition of the decking, access, and whether you choose a retrofit or full replacement. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. For a typical ranch home in 89506, most homeowners are looking at a few thousand to the low five figures depending on the scope. Call (775) 993-7431 for a free, no-pressure estimate tailored to your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Lemmon Valley and nearby areas.

My shingle roof on a 1980s ranch off Lemmon Drive is losing granules. Is a metal roof over shingles a good option here?
Yes, a retrofit over existing shingles can be a smart choice if your roof has only one layer and the decking is sound. It saves on tear-off costs and landfill fees, and it is allowed by code in many cases, though we always verify the number of existing layers with the local building department. In Lemmon Valley, where wind is a factor, we make sure the new metal panels are fastened properly to handle the gusts.
A windstorm just lifted some panels on my roof near Stead. How fast can you respond?
We prioritize storm damage calls in Lemmon Valley and the surrounding area. Call us at (775) 993-7431, and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs.
What does a typical metal roof repair cost in Lemmon Valley?
Most repairs start at $450, which covers common issues like tightening or replacing fasteners, sealing flashing, or fixing a small leak. The final cost depends on the extent of the damage, roof accessibility, and materials needed. We give you a clear estimate before any work begins.
Do I need a permit for a metal roof in Lemmon Valley?
Yes, roofing permits are commonly required for full replacements and re-roofs, and requirements vary by jurisdiction. We handle the permitting process for you and verify the current rules with Washoe County. You can also check the City of Lemmon Valley website at https://www.washoecounty.gov for general information, but we recommend confirming directly with the building department.
My neighbor's tree branches hang over my property line. Can I trim them to protect my new metal roof?
In Nevada, you generally have the right to trim branches that encroach on your property, but it is best to check local ordinances and talk with your neighbor first. If your HOA has rules about landscaping or roof visibility, review those as well. We can advise on roof clearance and help you coordinate with your neighbor if needed.
Are you fully insured for work at my Lemmon Valley home?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
How should I maintain my metal roof in Lemmon Valley's climate?
Inspect your roof twice a year, especially after winter and before the windy season. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of ice damming at the eaves. We offer inspections and maintenance plans to keep your roof in good shape and catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm