Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Incline Village, NV (89451) · Local Professionals

Reno Metal Roofing · Fast response in Incline Village and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Incline Village is a mountain community where the roofs do the heaviest lifting. With homes perched on steep, pine-covered lots above Lake Tahoe, many with dramatic pitch to shed snow, a roof here faces some of the deepest snow loads in the region, along with intense high-desert sun and freeze-thaw nights that work on fasteners and seams year after year.

That is why homeowners in Incline Village (89451) call Reno Metal Roofing. We have been installing, repairing, and replacing metal roofs since 2009, and we understand what Tahoe weather does to a roof. Whether you are near the Championship Golf Course or up a winding driveway off Mount Rose Highway, we bring the right panels, fasteners, and snow guards for the job.

Metal Roofing in Incline Village (89451)

Incline Village properties are not like the flat lots down in the Truckee Meadows. Many homes sit on steep grades with tight access, which means staging materials and getting crews safely to the roof takes planning. The snow load here is serious, so we spec standing seam and structural panels with the right clip spacing and fasteners. Ice damming at the eaves is common on high-elevation homes, and we address it with proper underlayment, ice-and-water shield, and snow guards that keep snow from sliding off in a dangerous sheet. The intense sun at this altitude also degrades cheap fasteners and coatings, so we use materials rated for the exposure.

Our team has served Incline Village and the greater Reno area since 2009, and we are a Metal Roofing Alliance Member. We are fully insured with general liability and workers' compensation, so you are covered if anything goes wrong on a steep Tahoe roof.

Our services in Incline Village

How a Job Works in Incline Village

Step 1: You call us at (775) 993-7431 or request a free estimate online. We schedule an on-site assessment at your Incline Village property, look at the roof from the ground and on top, check the attic if accessible, and talk through your options. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. On tight Tahoe lots, we plan material delivery and staging carefully, and if your home is in an HOA or a design-review area, we help you get the panel profile and color approved before we order. Our crews are trained for steep-pitch and snow-country roofing, and we protect your landscaping and driveway during the job.

Step 3: When the work is done, we clean the site thoroughly, haul away old materials, and walk the roof with you. We do not leave until you are satisfied and understand the maintenance basics for your new metal roof.

Pricing in Incline Village depends on the size and pitch of your roof, access, the condition of the existing roof, and how quickly you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, though local code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. For an accurate number on your home, call (775) 993-7431 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Incline Village and nearby areas.

My Incline Village roof gets huge snow loads and ice dams at the eaves. What metal roof system works best?
For Tahoe snow country, we usually recommend standing seam metal roofing with a high-quality ice-and-water shield underlayment and properly spaced snow guards. Standing seam panels shed snow well, and the raised seams help prevent water from backing up. We also check attic ventilation and insulation, since ice dams often start with warm air leaking into the roof deck.
A storm just peeled back some panels on my roof in Incline Village. How fast can you respond?
We offer free inspections for storm and wind damage and prioritize active leaks and safety hazards. Call us at (775) 993-7431, and we will schedule a visit as soon as possible. In the meantime, keep people away from the damaged area and document any interior leaks with photos for your insurance claim.
What does a typical metal roof replacement cost in Incline Village?
Most full replacements in Incline Village fall in the range of $9 to $14 per square foot installed, depending on panel type, roof complexity, pitch, and access. Standing seam runs higher, starting around $10 per square foot, while corrugated panels start lower. We give you a written estimate after seeing your roof, so you know the real number before you commit.
Do I need a permit to replace my roof in Incline Village, and where do I start?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Incline Village. Rules and fees vary, so it is best to check with the local building department before work begins. You can start with the Washoecounty.gov website for general county information, and we can help you navigate the permit process as part of your project.
My HOA has design rules, and my neighbor says my new roof color is a problem. What should I do?
Incline Village has several HOAs and design-review requirements, so it is smart to get approval before ordering materials. We can provide panel profile and color samples for your HOA submission. If there is a property-line concern, a survey or the county setback rules will settle it, and we always keep work within your property lines.
Are you fully insured for work at my Incline Village home?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start, so you have peace of mind knowing our crew is covered while working on your property.
What maintenance does a metal roof need in Incline Village's climate?
In our climate, the main things are keeping gutters and snow guards clear of pine needles and debris, checking fasteners and seals every few years, and touching up any scratched paint or coating. We recommend a professional inspection after heavy snow seasons or big wind events. A little preventive care goes a long way toward avoiding leaks and ice damage.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm