Serving the Reno area  ·  (775) 993-7431  ·  Open Mon-Sun 7am-7pm
📞 (775) 993-7431 Free Quote

Metal Roofing in Washoe Valley, NV (89704) · Local Professionals

Reno Metal Roofing · Fast response in Washoe Valley and the Reno area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Washoe Valley is a place where the wind tells you what kind of roof you need. Homes tucked below Slide Mountain and along the valley floor take a beating from the Washoe Zephyr, and the wildfire risk is never far from anyone's mind. Whether you're in a ranch house on a few acres or a custom home with a steep pitch, your roof is the first line of defense.

That's why homeowners in Washoe Valley (89704) call Reno Metal Roofing. We've been working in this valley since 2009, and we know how to handle the wind-lifted panels, failed fasteners, and ice damming that come with the territory. We're a Metal Roofing Alliance member, fully insured, and we treat every property like it's our own.

Metal Roofing in Washoe Valley (89704)

Washoe Valley is a mix of wide-open ranch properties, horse setups, and scattered custom homes, many on lots that slope down from the Sierra foothills. That means we're often dealing with steep grades, tight access for equipment, and drainage that has to be managed carefully to protect foundations and driveways. The valley's famous winds can peel back poorly fastened panels, and the freeze-thaw cycles at this elevation make ice damming a real concern at the eaves. We've seen it all, from corrugated panels on barns to standing seam on high-end homes, and we know which profiles and fastening methods hold up best against the valley's specific challenges.

Our team has been serving Washoe Valley and the greater Reno area since 2009. We're licensed, insured, and we understand the local building department's requirements. When you work with us, you're getting a contractor who knows the difference between a roof that survives one season and one that lasts decades.

Our services in Washoe Valley

How a Job Works in Washoe Valley

Step 1: It starts with a phone call to (775) 993-7431 or a request through our website. We'll schedule a free on-site assessment at your Washoe Valley property, where we'll inspect your current roof, take measurements, and talk through your options. You'll get a clear, written estimate with no surprises.

Step 2: Once you approve the estimate, we handle the permitting and scheduling. In Washoe Valley, that often means coordinating with the county and, if you're in an HOA, making sure the panel profile and color meet the design guidelines. Our crews are experienced with the tight access and steep grades common on valley properties, so we can get the job done efficiently and safely.

Step 3: After the install, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you're satisfied. We leave your place clean and your new roof ready for whatever the valley throws at it.

Pricing for metal roofing in Washoe Valley depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof over shingles at $7. Repairs start at $450, and screw replacement and re-fastening starts at $750. For a more accurate number, call us at (775) 993-7431 for a free estimate. We'll give you a straight answer and help you understand the key cost factors, like access, urgency, and whether any structural work is needed.

✅ Metal Roofing Alliance Member, licensed and insured for work in Washoe Valley and nearby areas.

My house is right below Slide Mountain and gets hammered by wind. What's the best metal roof for that exposure?
For high-wind areas like the east side of Washoe Valley, we recommend standing seam metal roofing with concealed fasteners. It eliminates the screw penetrations that can work loose over time and is much less prone to wind uplift. We also pay close attention to the fastening pattern and use wind-rated clips to meet local code. If you already have corrugated panels, we can inspect and re-fasten them to extend their life.
A storm just ripped some panels off my barn. Can you come out today?
We prioritize storm and wind damage calls in Washoe Valley. Call us at (775) 993-7431 and we'll get a crew out as soon as possible to secure the area and prevent further damage. We offer free inspections for storm damage and can provide a detailed report for your insurance claim. We'll never promise to waive your deductible, but we will document everything thoroughly.
What does a typical metal roof replacement cost in Washoe Valley?
Most full replacements in Washoe Valley run between $9 and $12 per square foot installed, depending on the material and complexity. That includes tear-off, underlayment, and flashing. Smaller jobs or simpler roofs can be less, while larger homes with steep pitches or difficult access may be more. We always provide a free, no-obligation estimate so you know exactly what to expect.
Do I need a permit to replace my roof in Washoe Valley?
Yes, roofing permits are generally required for a full replacement or re-roof in Washoe County. The exact requirements and fees can vary, so it's best to check with the local building department. You can find contact information and resources on the official Washoe County website. We handle the permitting process for you and make sure the work meets all applicable codes.
My HOA has strict rules about roof colors. Can you help with approval?
Absolutely. We work with HOAs throughout Washoe Valley regularly. We can provide color samples, manufacturer specs, and any documentation your HOA needs for design review. If there's a property line issue with a neighbor, we can also coordinate access and ensure the installation respects setbacks. Just let us know upfront so we can plan accordingly.
Are you insured for work on my Washoe Valley property?
Yes, we are fully insured with both general liability and workers' compensation coverage. You can request a certificate of insurance before we start any work. We take safety and accountability seriously, so you can have peace of mind knowing your property and our crew are protected.
How often should I have my metal roof inspected in Washoe Valley?
We recommend an inspection every two to three years, and after any major wind or hail event. The valley's intense sun and freeze-thaw cycles can loosen fasteners and degrade sealants over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections, so give us a call to schedule one.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Reno

All your work handled by qualified professionals in Reno

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Reno

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Reno · Response within 24h · No commitment · ☎ (775) 993-7431

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Reno ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm